Electrical Parts for Old Cars
Spark Plug Wire available:
- 7MM lacquered cloth
- 7MM PVC
- 7MM for Pertronix Ignition
- 7.8 MM lacquered cloth
- 9MM lacquered cloth
Terminals to fit above spark plug wire:
- 7 to 8 MM right angle
- 7 to 8 MM straight:
- SSCSPT Straight steel crimp spark plug terminal end
- RAJSSPT Rajah Nickel plated solder style spark plug terminal end
- SCBSPT better straight steel crimp boot style spark plug terminal end
- Forked terminals for 7mm:
- Ring terminals for 7mm
- Terminals for 9mm
- Distributor Cap and Coil Terminals for 7mm
- SSDCCT Solder type distributor cap or coil terminal
- BDCCT Better distributor cap or coil terminal
- SDCCT Standard distributor cap or coil terminal
- 90DCCT 90° Distributor cap/coil terminal
- Distributor Cap and Coil Terminal for 9mm
- Brass Thumb Nuts
- M4SPBN M4 metric thread spark plug thumb nut for new style spark plugs for use with forked terminals.
- 8/32SPBN 8/32 thread spark plug thumb nut for original Champion X and 3X plus other spark plugs that used thumb nuts and forked terminals
- 8/32LBCBN 8/32 thread buzz coil and battery box brass thumb nut
Distributor Cap, Coil and Spark Plug Boots
Note: The cap/coil boot has a 9/16" ID. Most of the distributor caps up through the 1960s were standardized to fit this size boot.
The larger coil boots are 3/4 inch ID. These are used if the coil terminal is larger than the cap terminals.
- 7MM Distributor Cap / Coil Boots
- 7MM Coil Boots
- 7MMSpark Plug Boots
Note: Reproduction straight spark plug boot is used with SCBSPT straight steel crimp boot style terminal. Reproduction 90 degree spark plug boot is for use with 90 CBSSPT 90 degree steel crimp boot style terminal.